Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Harley lifters

  1. #1
    Join Date
    Apr 2010
    Location
    Wyoming
    Posts
    73

    Default Harley lifters

    H/D are having failures with the 18538-99c lifters LOOK in here to see if your year bike has them http://www.shopronniesharleydavidson...partfinder.htm
    V/H 2-1 PCV PROGRESSIVE 944 KLOCK WERKS 6.5 SOLO SEAT SOFTPEDLE CONTROL 360 HIWAY PEGS BIGSUCKER V/H THROTTLE PAC REDSHIFT 577 WITH DUAL TENSIONERS ADJUSTABLE PUSH TUBES FUELING HP LIFTERS DYNO TUNED one hp per cu in pulls hard from 2000 -redline with no dip in dyno lines 96 CU

  2. #2
    Join Date
    Dec 2011
    Location
    SE Michigan
    Posts
    3,140

    Default

    Source? Whats the issue?

    [edit] Some mention here: http://www.v-twinforum.com/forums/tw...-problems.html
    Last edited by Kosher; 04-13-2013 at 06:16 PM.
    _________
    Roll away the dew...


  3. #3
    Join Date
    Aug 2008
    Location
    Brownstown, MI
    Posts
    16,618

    Default

    Doesn't look like they were used in 2009.
    ^^My $0.02 not yours^^
    -Chris
    aka Gas Man

    "Why pay somebody else to fuck up your bike?"
    "Custom don't bolt on!"

  4. #4
    Join Date
    Dec 2011
    Location
    SE Michigan
    Posts
    3,140

    Default

    "c" version is in mine. Well, I got 2 years on a warranty...
    _________
    Roll away the dew...


  5. #5
    Join Date
    Dec 2009
    Location
    Kimball,MI.
    Posts
    3,413

    Default

    looks like I have the B version in mine...and it also says that the C would be the replacement...my bike is a 2011...so hopefully I won't have anything to worry about...
    Last edited by Bagger Dave; 04-13-2013 at 07:14 PM.

  6. #6
    Join Date
    Aug 2008
    Location
    Brownstown, MI
    Posts
    16,618

    Default

    I will have all of this shit checked and fixed next winter... things like the cam chain tensioner, etc. When I do a cam and tune...
    ^^My $0.02 not yours^^
    -Chris
    aka Gas Man

    "Why pay somebody else to fuck up your bike?"
    "Custom don't bolt on!"

  7. #7
    Join Date
    Dec 2011
    Location
    SE Michigan
    Posts
    3,140

    Default

    Quote Originally Posted by Gas Man View Post
    I will have all of this shit checked and fixed next winter... things like the cam chain tensioner, etc. When I do a cam and tune...
    You have an 09, correct? There are no issues with your tensioners, that was 99-06. The upgraded cam plate and hydraulic tensioners came out in 07
    _________
    Roll away the dew...


  8. #8
    Join Date
    Sep 2009
    Location
    southgate
    Posts
    3,380

    Default

    Looks like I have it. Is there an actual recall or people having issues.
    Formerly known as Rugby66x


  9. #9
    Join Date
    Dec 2011
    Location
    SE Michigan
    Posts
    3,140

    Default

    Quote Originally Posted by RedneckMedic View Post
    Looks like I have it. Is there an actual recall or people having issues.
    No recall, I think this is just a case of internet forum-itis - a few people report problems (there will be failures its mechanical after all) and suddenly all the peasants show up with all their pitchforks and torches.
    _________
    Roll away the dew...


  10. #10
    Join Date
    Aug 2008
    Location
    Brownstown, MI
    Posts
    16,618

    Default

    Quote Originally Posted by Kosher View Post
    You have an 09, correct? There are no issues with your tensioners, that was 99-06. The upgraded cam plate and hydraulic tensioners came out in 07
    I think there is something bad. Maybe just the primary chain tensioner that I already replaced. Idk.
    ^^My $0.02 not yours^^
    -Chris
    aka Gas Man

    "Why pay somebody else to fuck up your bike?"
    "Custom don't bolt on!"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •