PDA

View Full Version : Chopper Dave wrench day - May 11th, 2012



Gas Man
04-27-2012, 04:44 PM
Ok so on the docket for Dave's K9 is take the front end off, run over the rim with my truck for character, complete rebuild of his front forks, take the tripple trees off, pee through the neck of the frame, clean/inspect/repack the neck bearings, re-assemble... all while N8KAM tidies up some Wire's Plus wiring... Ok so not all of that will be done, I may not do the forks if I have too much fun running over his front rim! :lol



We'll start around 12pm and go till it finishes... at my house.

All are welcome to join in, you may be put to work unless you have girl parts.

If you have something needing to be done and we get enough people I'm sure we can fit it in... Just post up what you're thinking...

Bagger Dave
04-27-2012, 04:59 PM
And install new handlebar bushings...and adjust clutch rod and replace clutch rod side cover....All in a days work! sweet!! :lmao::pc:

I will keep a eye on the weather...TopShelf Scott said I can use his trailer again if the weather is shitty...

Bagger Dave
04-27-2012, 05:40 PM
I just talked to Scott...I will just use his trailer to take my bike to Chris's crib...this way I can carry all my shit...plus I will bring Iron Rider for his new foster home :drewpy:

Gas Man
04-27-2012, 05:54 PM
Oh yeah... need to get IR on the road.... I wish I had him for this weekend!!!!!

Caveman
04-27-2012, 10:23 PM
Ok, Chris, what about my Suspension bits? I think that we may have the back ones by then. MAYBE

Gas Man
04-28-2012, 10:13 AM
We'll see cave.

Kosher
04-28-2012, 08:13 PM
Might have to swing by for this one, if nothing else just to shake some hands.

Caveman
04-28-2012, 08:24 PM
There we go!!! Meet and Greet and Gas' house. bring some beer and your scoot and we will party down

Caveman
04-28-2012, 08:25 PM
just noticed that you have this for the 11th. Thats a friday not a Saturday......Just curious:skep:

leebo
04-28-2012, 08:33 PM
Pretty hi tech place you guys are runnin there!

Moesride
04-28-2012, 09:36 PM
Might have to swing by for this one, if nothing else just to shake some hands. Wouldn't mind swinging by either. Could learn something from Daves BD...........I'd be rollin in late if you guys are doing this on a friday though.

Bagger Dave
04-28-2012, 11:56 PM
Wouldn't mind swinging by either. Could learn something from Daves BD...........I'd be rollin in late if you guys are doing this on a friday though.
That's no problem Moe...we usually work late anyways :lol: I will probably just crash at Chris's and leave sometime Saturday afternoon :cheers:

Gas Man
04-30-2012, 12:36 PM
Yeah it's a Friday. So if needed we can spill into Saturday.

We can get some Shiet done. Let me know if you want to have some done to your bike. Post it here.

RedneckMedic
05-01-2012, 06:57 PM
Ill be able to come since its on a friday. If anyone is half way decent with wiring and wants to show me how to solder then I could finally run my hanldebar wiring internally.

Gas Man
05-01-2012, 07:01 PM
Caveman is a soldier champ!! Plus N8KAM will be around and he may even be better than Cave.

seatmaker
05-01-2012, 10:04 PM
Well if I'm in town and it spills into Saturday I wouldn't mind having the Nater look at my wiring. Did the wire plus myself and got it all right with the exception of losing the high beams. Would also like to see the forks being done too as I'm in need also for a seal change.

Gas Man
05-02-2012, 01:21 PM
Well I hope much doesn't fall into Saturday... nothing much anyway...

Gas Man
05-09-2012, 09:20 PM
Gents... let me know if you are coming over.

PM, email, or text me if you need to know where I live.

RedneckMedic
05-09-2012, 10:55 PM
I'll be coming

Bagger Dave
05-09-2012, 11:14 PM
I don't know if TopShelf Scott will swing by when he gets out of work Friday or not...

Gas Man
05-09-2012, 11:24 PM
Lance. You know where it is.

Dave. That would be cool.

Mad Dog
05-10-2012, 09:59 AM
Sure, make it on a friday.:rolleyes:

Gas Man
05-10-2012, 10:25 AM
We'll be working late... more than likely... but who knows...

Kosher
05-10-2012, 11:08 AM
Wont be able to make it, but take lots of pics!

Gas Man
05-12-2012, 08:12 PM
So we tore Dave's bike apart...

http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/8e768341.jpg
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/e95cd87a.jpg
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/c40f8818.jpg

Replaced the bushings... which weren't that bad for 10,000 miles on a 12" over front end.
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/462aee80.jpg

Also did new seals and fresh oil. The good Belray 20W oil and it's fancy jug
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/b2dd0172.jpg

Lance stupervising
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/849c8621.jpg

All rebuilt and ready..
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/46bbda2e.jpg

This was right after we removed the neck bearings for inspection, cleaned and repacked the grease.
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/a887b286.jpg

Coming back together
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/3c4961b5.jpg

Also removed his exhaust to replace the clutch adjustment cover, and adjusted the clutch
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/b9537dac.jpg
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/af48f254.jpg

Test rode and no more front end clicking... Dave was very happy
http://i99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Dave/032cee3c.jpg

Bagger Dave
05-12-2012, 08:48 PM
Hell yeah! Thanks again for all your help and hospitality :rockwoot:we also replaced my handlebar bushings...had a great time at Sean's suburb bonfire!! :lmao::whoop:

yep...had a clicking in my front end...after week did the fork seals..bushings and oil...no more clicky!
when I got back home...I noticed I lost my chrome ring that goes around my headlight....thankful that I had a new spare! I tightened my headlamp back up...cleaned threads...put a little anti-seize on the threads...put on new chrome ring...and loc-tited my set screw, so it shouldn't come loose again...I think my set screw wasn't all the way on the ring...good to go now! :cheers:

Moesride
05-12-2012, 09:25 PM
Thats awesome fellas! You gotta be one happy guy Dave! Good to have great friends like that. Killer bike Dave!

Bagger Dave
05-12-2012, 09:27 PM
Thats awesome fellas! You gotta be one happy guy Dave! Good to have great friends like that. Killer bike Dave!
Yep yep! :rockwoot: Thanks Moe! :cheers:

Kosher
05-13-2012, 10:13 AM
Looks like it was a lot of fun. Hope I can make it out for the next one...

Gas Man
05-13-2012, 11:46 AM
For sure man!!